Accueil
switch poe 10 port
Managed Industrial 6 and 10 Port PoE/PoE+ 10Gigabit Ethernet Switch

Managed Industrial 6 and 10 Port PoE/PoE+ 10Gigabit Ethernet Switch

4.9 (375) · € 39.99 · En Stock

Managed Industrial 6 and 10 Port PoE/PoE+ 10Gigabit Ethernet Switch
The RuggedNet 10GPoE+/Mi is a ruggedized managed PoE and PoE+ industrial Ethernet switch that features two 1/10G uplink ports and four or eight 10/100/1000 RJ-45 PoE/PoE+ user ports. The RuggedNet 10GPoE+/Mi is a Layer 2 Ethernet switch that forwards frames to any port based on their MAC address. All models support Directed Switch mode, which directs multicast traffic (such as video) only to the appropriate uplink port, preventing multicast traffic from flooding other network ports. The switches support redundant uplinks, industrial ring Media Redundancy Protocol (MRP), Spanning Tree protocol and daisy-chain configurations for high availability industrial network applications. The switches support Dual Device mode that enables the 10GPoE+/Mi to operate as two independent and isolated Ethernet switches. The mode of operation can be configured using easily accessible DIP-switches or using Web, Telnet, SSH, SNMPv1/v2c/v3 or Serial Console management interfaces. IPv4 and IPv6 are supported on the switches. These management interfaces provide access to filtering and security options, such as, broadcast storm prevention, IGMP, IEEE 802.1x, RADIUS, TACACS+ and Access Control Lists. Email notification and alarm reporting is provided. The RuggedNet PoE switches are available with Small Form Pluggable (SFP) transceiver receptacle ports. The SFP ports support 10/100/1000BASE-T, 1000BASE-T and 10GBASE-T copper transceivers. They also support 1G and 10G multimode or single-mode fiber, dual or singlefiber and standard, CWDM and DWDM wavelengths. The switches feature a Remote PoE Power Reset function that enables the user to remotely power-cycle and reset each PD. They also feature a configurable Heartbeat Reset function that automatically pings the attached PDs and automatically power cycles and resets the PDs when detecting a heartbeat loss. An alarm relay is available to detect user configured events. The relay contact can be configured for normally open or normally closed operation. One alarm input is available for detecting external events such as door open or closed. All models can be wall or rack mounted using a wall mount bracket and shelf or DIN-rail mounted using the included DIN-rail mounting clip. They are available with dual DC input power.

Industrial PoE++ Switch – 10-Port Industrial Gigabit PoE+ DIN-Rail

Industrial 16-Port Full Gigabit L3 Managed PoE Switch with 4-Port

Layer-3 24-Port Industrial Ethernet Switch With 4 × 10G SFP

54-port 450 W Gigabit Ethernet PoE+ Layer 2+ Managed Switch with Six 10G Uplinks - a powerhouse of Power over Ethernet, ports and Self-Healing Network

54-Port L2+ Fully Managed PoE+ Switch with 48 Gigabit Ethernet Ports and 6 SFP+ Uplinks

MICROSENS - 12-Port 10G Industrial Switch L3 PoE+

20 Port Managed Layer 2 PoE+ Ethernet Switch with 10GbE Uplink

Offering up to 24 PoE/PoE+ ports with a total 740W power budget, it efficiently powers devices like APs and PoE IP cameras in access networks.

FS 24-Port Stackable L2+ Managed PoE+ Switch with 24x 1GBase-T & 10g Uplinks, BCM56150 Chip, 740W Budget, 1+1 Hot-Swap PSUs, S3410-24TS-P 108718

S5800 Series L2+ 10G Managed Ethernet Switch - JWIPC Technology Co

Businesses need to be ready for future expansion: with incoming new multispeed devices, their wired network needs to expand its reach and scope to support speeds greater than 1 Gigabit. The IEEE 802.3bz standard paved the way for new 2.5 Gigabit and 5 Gigabit speeds in addition to legacy 1 Gigabit and 10 Gigabit per second.

Netgear MS510TXPP Ethernet Switch

The Intellinet 24-port Gigabit Ethernet PoE+ web-managed switch with 4 SFP combo ports (560900) is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables.