Polymaker PolyTerra PLA+ in White– Ultimate 3D Printing Store
4.5 (72) · € 12.50 · En Stock
Polymaker PolyTerra PLA+ - White Designed to Create the Next Generation of 3D Printing Filaments PolyTerra PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth. Polymaker has committed to planting one tree for every roll of filament sold. This makes PolyTerra PLA a net negative carbon producer, so you can rest easy with your choice of filament. Along with this carbon offset, PolyTerra PLA also biodegrades faster than most other PLA filaments in an industrial environment. Printing Settings Don't waste your time fiddling with settings, and get printing right away. Check out our pre-tested print settings below
Polymaker PolyTerra PLA+ - White
Designed to Create the Next Generation of 3D Printing Filaments
PolyTerra PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.
Polymaker has committed to planting one tree for every roll of filament sold. This makes PolyTerra PLA a net negative carbon producer, so you can rest easy with your choice of filament. Along with this carbon offset, PolyTerra PLA also biodegrades faster than most other PLA filaments in an industrial environment.
Printing Settings
Don't waste your time fiddling with settings, and get printing right away. Check out our pre-tested print settings below to get started printing with your brand new filament even faster. Some settings may change slightly depending on your 3D printer.
Hotend Temperature: 190°C - 230°C
Bed Temperature: 25°C - 60°C
Print Speed: 30mm/s - 70mm/s
Fan: On
For Direct Drive Extruders
Retraction Distance: 1mm
Retraction Speed: 20mm/s
For Bowden Tube Extruders
Retraction Distance: 3mm
Retraction Speed: 40mm/s
Drying Settings
(Only if the material has absorbed water)
55°C for 6hr
Product Reviews
Features of Polymaker PolyTerra PLA+
Commitment to Environmental Sustainability
Polymaker's PolyTerra PLA+ shows a commitment to environmental sustainability in a couple of different ways. First, PolyTerra is actually a bioplastic, meaning that it is a plastic compound created by combining Polylactic Acid (PLA) with a bio-compound derived from biodegradable and naturally occurring ingredients. This makes it possible to use 20% less plastic to make the same amount of filament with great physical characteristics.
Another step Polymaker is taking to make 3D printing more environmentally sustainable is by committing to plant 1 tree for every roll of PolyTerra PLA sold. 1 roll of PolyTerra, including the box, spool, bag, and filament, generates around 4kg of CO2 from cradle to factory. The one tree planted for that spool of filament should remove around 22kg of CO2 per year in maturity.
While PolyTerra is not biodegradable in the natural environment, it does biodegrade faster than other PLAs in industrial settings. While this does not solve all of our problems with plastics waste, Polymaker believes that it is a step in the right direction towards improving the end of life of our PLA in the 3D printing industry. If you want to learn more about the sustainable efforts put into the development and sale of Polymaker PolyTerra PLA+, click here.
More Information about PolyTerra PLA+
Download Technical Data Sheet
Download Safety Data Sheet
Download PolyTerra Compostability Sheet
Filament with a focus on sustainability. Price: $21.64.
PolyTerra PLA+ Blue 1.75mm
Polymaker PolyTerra PLA Arctic Teal - 3DJake International
Polymaker PolyTerra PLA+ White - 3DJake International
Polymaker PLA PolyLite LW-PLA 3D Filament Cardboard Spool Low Density
This filament HELPS THE ENVIRONMENT! - Polymaker PolyTerra PLA
Polymaker PLA Filament 1.75mm 1kg Spool High Rigidity PLA Filament 1.75 - PolyLite PLA 3D Printer Filament - AliExpress
PolyLite by Polymaker offers excellent 3D printing performance, a vibrant palette of colors, and will become your affordable, go-to choice. This premium filament 3D prints reliably, has minimal warping/shrinking when compared to other materials, and is perfect for applications featuring flat surfaces and hard angles, or requiring tight tolerances for fit. Choose 250 g (0.55 lb) reels to expand your color options and the larger 3 kg (6.6 lb) reels to keep 3D printing, hour after hour.
Polymaker 3kg Matte PLA Filament 1.75mm, Black PLA 3D Printer Filament 1.75 - PolyTerra 1.75 PLA Filament Matte Black 3kg, Cost Effective Large Roll
PolyLite by Polymaker offers excellent 3D printing performance, a vibrant palette of colors, and will become your affordable, go-to choice. This premium filament 3D prints reliably, has minimal warping/shrinking when compared to other materials, and is perfect for applications featuring flat surfaces and hard angles, or requiring tight tolerances for fit. Choose 250 g (0.55 lb) reels to expand your color options and the larger 3 kg (6.6 lb) reels to keep 3D printing, hour after hour.
Polymaker PolyTerra PLA+ 3D Printer Filament 1.75mm
PolyLite by Polymaker offers excellent 3D printing performance, a vibrant palette of colors, and will become your affordable, go-to choice. This premium filament 3D prints reliably, has minimal warping/shrinking when compared to other materials, and is perfect for applications featuring flat surfaces and hard angles, or requiring tight tolerances for fit. Choose 250 g (0.55 lb) reels to expand your color options and the larger 3 kg (6.6 lb) reels to keep 3D printing, hour after hour.
Polymaker PolyTerra PLA+ 3D Printer Filament 1.75mm
PCX-002-017, PolyTerra PLA, Muted White – The Print Codex
Hi everyone, I've started using Polymaker Polyterra filament lately and for some odd reason it constantly warps, I'm printing on glass at 195/45 and my first layer is perfect, please help!
