Accueil
12v poe switch
Tycon TP-SCPOE-1212 12V 8A Battery Charging Controller

Tycon TP-SCPOE-1212 12V 8A Battery Charging Controller

4.7 (206) · € 287.99 · En Stock

Tycon Power SystemsFeatures MPPT 48V 20A Solar ControllerTemperature Compensated Smart Battery Charging7 Port Gigabit Passive PoE SwitchRemote Monitor and Control48V or 24V User Selectable Output Voltage2.25A Auxiliary Wire Terminal OutputTotal 200W
BSC provides IP-Based wireless and wired networking services, solutions and products for Data, Video and Voice applications. With more than 20 years..
The newest in our TPDIN® series of products is the TPDIN-SC48-20 v2. It is a web manageable MPPT Solar Controller with built-in 7 Port Gigabit Passive PoE switch. The controller uses temperature compensated smart battery charging to properly charge GEL or AGM or Lithium batteries and extend their life. It has a balance charge mode for periodic battery bank maintenance. There are 4 Gigabit 802.3at or 24/48V Passive PoE and 3 Gigabit 24/48V Passive PoE ports. Each port is capable of 0.645A Max. There is a wire terminal auxiliary output capable of 2.25A maximum. Total from all outputs is set at 150W at 48VDC and 72W at 24VDC for a max total of 222W. Outputs can be switched by user between 802.3at (port 1-4 only), 48VDC, 24VDC or OFF through the web interface.The web interface has full capabilities to measure and log battery voltage, battery current, input voltage/current, load current and battery temperature. Ports can be controlled by a settable ping watchdog to power cycle the port if communications to the unit are interrupted. Auxiliary port can be controlled by voltage or temperature or time so it can be programmed to control lights, pumps, generators, heaters, fans, etc. The unit supports automated Email alerts if user programmed limits are exceeded so that the user can be alerted in case of developing problems at the site.The controller can also be powered through an external AC to DC power supply connected to the PV+/PV- input in order to charge the batteries from an AC source like grid power or generator.All inputs and outputs are surge and overload protected. Connectors and battery fuse are removable for easy maintenance. The controller can be mounted using the integral DIN rail mount bracket or using 2 mounting tabs. Features TPDIN® MPPT 48V 20A Solar Controller Temperature Compensated Smart Battery Charging 7 Port Gigabit Passive PoE Switch Remote Monitor and Control 48V or 24V User Selectable Output Voltage 2.25A Auxiliary Wire Terminal Output Total 200W Power Output Automatic Low Voltage Battery Disconnect DIN Rail or Screw Tab Mounting

Solar Kit, 12V 85W Solar with Mount and PWM Solar Controller

Tycon Wholesale Price List, PDF, Electrical Connector

Features• Remotely Measure 4 Voltages, 4 Currents, 2 Temperatures• Remotely Control Equipment with 4 Relays: 2 NC and 2 NO• Interfaces to Tycon MPPT

Tycon Power Systems TPDIN-Monitor-WEB3 PowerSens Web Remote Monitor& Control

The Tycon Solar TP-SC24-60N-MPPT solar controllers are MPPT (Maximum Power Point Tracking) temperature compensated battery charging controllers. The battery temperature probe cable is included. The controllers are auto-ranging to accommodate 12V and 24V battery systems. They are designed to charge Sealed (AGM), GEL, Flooded, and Lithium batteries. They also have a USER setting for customizable battery charge settings.