Bondtech Presents Slice Engineering's Mosquito Magnum Hotend
4.6 (373) · € 21.00 · En Stock
Slice Engineering's Mosquito Magnum hotend has more melting power, superior heat break performance, high structural rigidity, and wide temperature operating range.
Latest added Features
New heat break with reinforced throat and revised radiator to prevent damage during installation and repairs
New heat sink with wider opening for the filament path to more readily accept multi-material setups like the Prusa MMU or Mosaic Palette.
Extended Set Now Including
Boron Nitride thermal paste;
Mosquito Boot;
GammaMaster 0.4mm nozzle.
Recommendation: Use on high flow applications.
(thick nozzles and thick layers)
Not compatible with DDX. Hotends for DDX are here.
Mosquito Magnum is only available for 1.75 mm filament at this time.
The perfect upgrade for your 3D printer
BondTech BMG-M & Mosquito Magnum Set, 12V
The Latest From Slice Engineering: Mosquito Prime Hotend — Modern Makes
The Latest From Slice Engineering: Mosquito Prime Hotend — Modern Makes
Slice Engineering Mosquito Magnum Hotend Kit
The Mosquito Magnum+ Liquid is the High Flow Mosquito hotend for industrial and high flow applications., Mosquito Magnum+ supports up to 2 heater
Mosquito Magnum+ Air-cooled 2.85mm
Bondtech Presents Slice Engineering's Mosquito Magnum Hotend
PH3 Mosquito Magnum Upgrade - DDX Direct Drive eXtruder for Creality
Upgrade your Creality hotend and DDX Direct Drive eXtruder with a full genuine Mosquito hotend to PHase 3., Turn your Creality hotend into an
DDX PH3 Mosquito Magnum Upgrade
Slice Engineering Mosquito Magnum Hotend
Industrial Grade Mosquito Magnum Hotend by Slice Engineering, Professional 3D Printer Upgrade, High-Flow Rate, Eliminate Heat Creep, Print PEEK & PC, Bimetallic Heat Break
Bondtech Presents Slice Engineering's Mosquito Liquid Hotend
Latest added Features, New heat break with reinforced throat and revised radiator to prevent damage during installation and repairs, New heat sink
Mosquito hotend
Bondtech SLS DDX Adapter for Mosquito hotends from Slice Engineering
The Mosquito Magnum Hotend, developed by the visionaries at Slice Engineering, is a radical take on 3D printer hotend form. With its improved separated module keyhole construction and its expanded hot-zone designed for high flow, the Mosquito Magnum Hotend is even hotter (and cooler) than ever! Pair the Mosquito Magnum Hotend with the Bondtech BMG-M Extruder for the ultimate lightweight, minimalist hotend configuration that does not compromise performance or power.
Slice Engineering Mosquito Magnum Hotend
