Pro Micro - 5V/16MHz - SparkFun - Tillverkare

4.6 (786) · € 118.00 · En Stock

Here at SparkFun, we refuse to leave 'good enough' alone. That's why we're adding to our line-up of Arduino-compatible microcontrollers once more! The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface.This tiny little board does all of the neat-o Arduino tricks that you're familiar with: 9 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC.This latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled. We've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED circuit.Features:ATmega32U4 running at 5V/16MHzSupported under Arduino IDE v1.0.1+On-Board micro-USB connector for programming9x 10-bit ADC pins12x Digital I/Os (5 are PWM capable)Rx and Tx Hardware Serial ConnectionsOur Smallest Arduino-Compatible Board Yet!1.3"x0.7"Documents:SchematicEagle FilesBoard DimensionsHookup GuideGraphical DatasheetDatasheet (ATmega32U4)Firmware NoteArduino Addon FilesArduino Addon Files (IDE 1.5+)GitHub (Design Files)

Pro Micro & Fio V3 Hookup Guide - SparkFun Learn

SparkFun Pro Micro - 5V/16MHz : Electronics

Pro Micro & Fio V3 Hookup Guide - SparkFun Learn

Pro Micro 5V/16MHz — スイッチサイエンス

ATMega 32U4 running at 5V/16MHz Supported under Arduino IDE v1.0.1 On-Board micro-USB connector for programming 4 x 10-bit ADC pins 12 x Digital I/Os

SparkFun Pro Micro - 5V/16MHz

The Pro Micro is similar to the Arduino Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB

SparkFun Pro Micro - 5V/16MHz

SparkFun Arduino Pro Mini Starter Kit - 5V/16MHz - KIT-15254 - SparkFun Electronics

ATmega328P - Mikrokontroller - Embedded

ATmega328 running at 16MHz with external resonator. USB connection off board. DC input 5V up to 12V. RoHS Compliant. The Arduino Pro Mini 328 - 5V/16MHz is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need.

SparkFun Arduino Pro Mini 328 - 5V/16MHz

Explore your creativity using the SparkFun® Pro Micro - 5V/16MHz. Its compact ATmega32U4 board features a USB transceiver, enabling you to add onboard