PoE Over Coax Converter

5 (747) · € 53.50 · En Stock

The ability to wire PoE cameras over coax is finally here, and it is stable. You're reading it right, you can now send IP camera data and PoE power using existing RG59 or RG6 coax cable and this PoE over Coax converter set. While you'll still need a PoE s
CCTV Camera World is a direct supplier of security cameras and IP PoE camera systems backed by expert technical support. Call (877) 522-8836 today.
The ability to wire PoE cameras over coax is finally here, and it is stable. You're reading it right, you can now send IP camera data and PoE power using existing RG59 or RG6 coax cable and this PoE over Coax converter set. While you'll still need a PoE switch or PoE injector to send power and data using this kit, you no longer need to worry about the expense and effort of replacing your existing coax wiring. You can keep your existing wiring and upgrade to an IP camera system with the help of this kit. If you already have an IP camera system and you have a lengthy run, this kit can also be used to exceed the 328 ft limit of Ethernet. You can simplify extended PoE (ePoE) runs by using coax wire that is inexpensive and weather resistant. With the transceiver and receiver kit you can easily run one 1080P, 2K, or 4K PoE camera up to 2000 ft depending on the wattage consumption of the camera. For some low power Pan Tilt Zoom camera you can even go up to 2000 ft, that's nearly half a mile! However, it's important to note that pre-made coaxial cable will not work because of it's thin gauge. Transmission Distance Power Capacity Bandwidth 330ft (100m) 21W 100Mbps 1000ft (300m) 11W 100Mbps 2000ft (600m) 7W 10Mbps Features PoE IP Camera connections over Coax cable Passively powered by PoE Switch or PoE Injector 1 RJ45 10/100Mbps Port, 1 BNC Port Conforms to IEEE802.3, IEEE 802.3u, IEEE802.3af/at 100 Mbps up to 1000ft 10 Mbps up to 2000ft Works with IP PoE Cameras, PoE WiFI Access Points, VOIP Phones Includes: Transmitter (LR-1ET) Receiver (LR-1EC) Screws Specifications Ports One 10/100Mbps Base-TX One BNC Max. Transmission Bandwidth Using RG59 Coax 1000 ft: 100Mbps 2000 ft: 10Mbps LED Indicators PWR, LINK LEDs Input voltage 100V~240V AC, 50/60Hz Power consumption < 2W Operating temperature -22°F - 149°F Relative humidity 5% - 95% (non-condensing) PoE Requirement IEEE 802.3af/at 25W minimum Dimensions (per unit) 3.1 x 2.0 x 0.9 Weight (each) 0.2 lbs Return Period Non-returnable and non-refundable

Upgrade your surveillance system with the AXIS T8642 PoE+ over Coax Device. This device allows you to transmit power and data over existing coaxial cables, eliminating the need for additional wiring. With its TAA and NDAA compliance, you can trust that this device meets the highest security standards. Experience seamless integration and enhanced flexibility with the AXIS T8642 PoE+ over Coax Device.