Accueil
petg filament
Overture PETG 3D Printing Filament 1.75mm – Overture 3D

Overture PETG 3D Printing Filament 1.75mm – Overture 3D

4.6 (235) · € 16.99 · En Stock

INTRODUCTION Superior Quality: Our PETG Filament is made from high-quality materials and is manufactured to strict quality standards, ensuring consistent performance and excellent print quality. High Strength and Durability: PETG Filament is known for its high strength and durability, making it ideal for a wide range o
INTRODUCTION Superior Quality: Our PETG Filament is made from high-quality materials and is manufactured to strict quality standards, ensuring consistent performance and excellent print quality. High Strength and Durability: PETG Filament is known for its high strength and durability, making it ideal for a wide range of applications. Low Shrinkage: Our PETG Filament has low shrinkage, which helps to reduce warping and improve the accuracy and consistency of your prints. High Compatibility: Our PETG Filament is compatible with a wide range of 3D printers, making it easy to use and highly versatile. Wide Range of Colors: Our PETG Filament comes in a wide range of vibrant colors, allowing you to create stunning and unique prints that stand out from the crowd. SPECIFICATIONS Young’s modulus (X-Y) 1472 ± 270 (MPa) Tensile strength (X-Y) 31.9 ± 1.1 (MPa) Elongation at break (X-Y) 6.8 ± 0.9 (%) Bending modulus 1174 ± 64 (MPa) Bending strength 53.7 ± 2.4 (MPa) Charpy impact strength 5.1 ± 0.3 (kJ/m2) FAQs: Why can't the filaments stick to the build bed? 1. Check the temperature setting before printing, PETG filaments have higher extrusion temperature than that of PLA; 2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure a strong first layer adhesion; 3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate; 4. If the effect is not good, it is recommended to try printing the draft before printing.