LONGER Anycubic wash and cure Machine

4.9 (645) · € 28.00 · En Stock

The anycubic wash and cure Machine from Longer is a high-quality washing and curing station designed for use with a variety of 3D printing resins, providing improved cleaning and curing results.
【2-in-1 Design & Full Metal Body】The wash & cure machine is designed for two functions-washing the models after printing and curing the model after washing. It's easier for users to use one machine to handle the process after printing. It's design perfectly for resin 3d printer and built with full metal body material and sealed body for safer design. 【Washing Modes】There're three options for washing: Heavey/Normal/Gentle washing. Model One: Remove the model from printing platform and put the model into the basket for wasing; Mode Two: Hang the printing platform onto the platform bracket for suitable position and fill with alcohol. The hanging is not only compatible with Orange 10, Orange 30 & Orange 4K, but also for Anycubic Photon, Photon S, Photon Mono, Elegoo Mars, Mars Pro, Mars Pro2, Creality LD-002R, LD-002H, etc. 【Curing Mode】Integrated with dual wavelength UV LED, 385nm & 405nm for fully curing; built-in 360° auto rotatable platform and full angle UV reflector for better curing. There're four duration for curing: 2/4/6/8 minutes. 【99.95% UV Isolated Hood】This machine comes with one-piece hood and block with 99.95% UV lighting when curing. And the curing system will be paused if the hood is lid up during curing, of which it will be better for health in case incident. 【Warranty and Service】NOTE: The printer comes without resin. 12-Month machine warranty and Lifetime Technical Support. High-efficiency and considerate community support by us.

Anycubic Wash And Cure 2.0 Silent Mod

Anycubic Wash & Cure 2.0 Station

ANYCUBIC Wash & Cure 3 Printed Model Washing and Curing Machine For SLA LCD Resin 3D Printer For Photon Mono 2/ D2 - AliExpress

LONGER Anycubic wash and cure Machine

ANYCUBIC Wash & Cure 3.0 Station Largest 2 in 1 Wash Machine for LCD 3D Printer1

Wash & Cure Max : r/AnycubicPhoton

ANYCUBIC Wash & Cure Plus Machine – The 3D Printer Store

Creality UW-02 Curing and Washing Machine

ANYCUBIC Wash and Cure 3.0, Newest Upgraded Volume 2 in 1 Wash and Cure Station, with Gooseneck Lights, for Mars Anycubic Photon Mono 4K 2 LCD SLA DLP 3D Printer, Washing Size