Accueil
thermistance ender 3 v2
[Gulfcoast Robotics] HEX EPCOS Thermistor Upgrade for Creality Ender 3 Ender 5 CR10 3D Printers 1 Meter Extension Cable

[Gulfcoast Robotics] HEX EPCOS Thermistor Upgrade for Creality Ender 3 Ender 5 CR10 3D Printers 1 Meter Extension Cable

4.7 (190) · € 5.99 · En Stock

EPCOS Thermistors are the ideal choice for the official Creality firmware. Provides more accurate temperature readings than traditional 100K NTC3950

Working temperature up to 300C. Leads insulated with fiberglass, thermistor glued with 600C rated ceramic compound. Our Screw In Thermistor uses most

EPCOS M3 Hex Stud Thermistor for 3D Printer Extruder Hotend

My second 3D printer just died - 3D Fabrication - Dallas Makerspace Talk

HEX Screw-In M3 NTC3950 100K Thermistor 3D Printer Extruder Hotend

BIGTREETECH Direct 2 Types BLTouch Extension Cable + Mount for CR 10 and Normal Controller Board

The All Metal Hotend Conversion Kit is a drop-in upgrade for Creality 3D Printers, including the latest models such as the Ender 3 V2, Ender 3 Max and Ender 5 Plus (see Compatibility tab for complete list). As a direct replacement for the stock hardware, installation requires no additional parts or modifications to use. It bolts up to the original mounting plate, re-using the same heater cartridge and thermistor wiring for a quick 5 minute setup.

All Metal Hotend Kit for Creality Ender 3 Pro V2 Ender 5 CR10 3D Printers

Creality Ender 5 Hotend Upgrade, Ender 5 Pro Hotend Thermistor, Ender 5 Plus Hot End Assembled 24V with Aluminum Heating Block 0.4mm Nozzle Teflon Tube for 3D Printer Ender-5 Plus, Ender

Complete LED Lighting Kit for the Creality Ender 3 and Ender 3 PRO Easy Installation - Takes less than 5 minutes to setup and use Dial Based Dimmer

Gulfcoast Robotics] 24V Premium White LED Light Upgrade for Ender 3 and Ender 3 PRO 3D Printers

How to keep thermistor attached to heating element? : r/3Dprinting

Furiga 24V 50W Upgraded Cartridge Heater Tube 3pcs and Temp Sensor NTC 100K 3pcs for Ender 3 V2 Neo,Ender 3 V2, Ender 3 pro, Ender 3 Neo Extruder 3D Printer Accessories

The EPCOS Thermistor is a perfect drop-in upgrade for Creality 3D Printers. It features a working temperature up to 300° Celsius, the leads are insulated with fiberglass instead of PTFE, and an M3 hex stud threads into the heater block for a secure fit. This is bonded to the thermistor with a high temperature ceramic compound rated for 600° Celsius. This makes it the ideal choice for high temperature filaments such as Nylon, Polycarbonate and more.