4.6 (768) · € 28.50 · En Stock
Hi, I am following the instructions here: I get to stage 4 (plug the usb in), and it never gets to stage 5. The LED does not turn off. Can anyone that knows what they are doing help? The powered hub seems to be working? It is supplying power. I cannot know whether it is sharing out the USB disks. It is one of these: Obviously I have no disks plugged in while I perform the reset, and only plug one in when it gets to reset mode. I have tried with 3 different USB drives, 2xUSB2, 1xUSB
OpenWrt 18.06.1 Don't show wifi wireless network and don't work - Installing and Using OpenWrt - OpenWrt Forum
Google wifi hardware now supported by OpenWrt : r/openwrt
Fresh OpenWrt install, wifi works, no internet connection - Installing and Using OpenWrt - OpenWrt Forum
Unable to setup Google Home devices - Installing and Using OpenWrt - OpenWrt Forum
How to Upgrade a Router // OpenWrt (How To Guide)
OpenWrt as a wifi client and access point - Installing and Using OpenWrt - OpenWrt Forum
OpenWrt 22.03: BT HH 5A - Installing and Using OpenWrt - OpenWrt Forum
openwrt flashing using TFTP
Wireless 5GHz Mesh with OpenWRT Better WiFi and Mobile coverage - Team-BHP
Sonoff L3-5M won't connect to WiFi - eWeLink Forum
Wireless 5GHz Mesh with OpenWRT Better WiFi and Mobile coverage - Team-BHP
GL.iNet GL-B1300 (Convexa-B) Home AC Gigabit VPN Router, 400Mbps(2.4GHz)+867Mbps(5GHz) High Speed, DDR3L 256MB RAM/32MB Flash ROM, OpenWrt Pre-Installed, Wi-Fi Networking, Power Adapter Included : Electronics