Facilan™ PCL 100 Filament, 3D4Makers

4.8 (530) · € 53.50 · En Stock

Facilan™ PCL 100 (Polycaprolactone) Filament Facilan™ PCL 100 it is perfect for high-value applications such as medical research. Our customers use our PCL for research into artificial trachea, smart materials, scaffolds for tissue engineering, bioabsorbable implants, drug-loaded implants and other cutting-edge applications. Facilan™ PCL 100 is used by many leading universities and research centers worldwide for bleeding edge work in bioprinting and patient specific medical research. Facilan™ PCL 100 is very flexible and tough with a glass transition temperature of -60 °C and a print temperature of around 120°C. Facilan™ PCL100 is polycaprolactone homopolymer with a molecular weight of 50000 g/mol. Facilan™ PCL100 is a semi-crystalline aliphatic biodegradable polyester with white final appearance. Filament produced by 3D4Makers is based on raw material produced in compliance with the European regulations EC No. 1935/2004 and EC No. 10/2011 concerning plastic materials and articles coming into contact with food. The material has an amazing adhesion between layers which results in great improvement
Facilan™ PCL 100 (Polycaprolactone) Filament Facilan™ PCL 100 it is perfect for high-value applications such as medical research. Our customers use our PCL for research into artificial trachea, smart materials, scaffolds for tissue engineering, bioabsorbable implants, drug-loaded implants and other cutting-edge applications. Facilan™ PCL 100 is used by many leading universities and research centers worldwide for bleeding edge work in bioprinting and patient specific medical research. Facilan™ PCL 100 is very flexible and tough with a glass transition temperature of -60 °C and a print temperature of around 120°C. Facilan™ PCL100 is polycaprolactone homopolymer with a molecular weight of 50000 g/mol. Facilan™ PCL100 is a semi-crystalline aliphatic biodegradable polyester with white final appearance. Filament produced by 3D4Makers is based on raw material produced in compliance with the European regulations EC No. 1935/2004 and EC No. 10/2011 concerning plastic materials and articles coming into contact with food. The material has an amazing adhesion between layers which results in great improvement of the impact resistance, strength, durability, and printability. Due to the low melting point, of Facilan™ PCL100 it can be reshaped after 3D printing in water with a temperature of 55 °C. Recommended restrictionsDo not use in medical applications involving permanent implantation in the human body. 3D4Makers Polycaprolactone Facilan™ PCL 100 is one of the most extensively used bioprinting and medical 3D printing research materials worldwide. Facilan™ PCL100 Material Properties Density: 1.1 g/cm³ Tensile Strength: 45 MPa Elongation at Yield: 15 % Tensile Modulus: 350 MPa IZOD Impact Strength (notched): 8 kJ/m2 Shore D Hardness: 46 Heat Deflection Temperature (0,45 MPa): 57 °C Molecular Weight (mean): 50,000 daltonsin Print Settings Print Temperature: 130°C (130 to 170°C) Bed Temperature: 30-45°C Adhesion: Ultimaker Adhesion sheets, Avery Mailing labels L7567-25, PEI Sheets Print Speed: 10mm/s (10 - 30 mm/s) Mass flow: 120% Fan Speed: 100% Note: Add M302 S120 into the beginning of the g-code to allow cold extrusion, below 170°C Extra: Minimum Layer Time considerably +/- 60 sec minimum, highly dependent of model size and complexity and enabled Lift Head. Support: If PVA or breakaway Support = enabled; Support overhang angle = 0°; Enable Prime Tower = Enabled. Support with Facilan Ortho onto itself: not recommended TDS You can download the Technical Data Sheet for Facilan™ PCL 100 here. MSDS You can download the Material Safety Data Sheets for Facilan™ PCL100 here: English Spanish French Italian German Dutch *The previous name of this product was PCL100

, PLA Filament (Polylactic Acid) is a biodegradable polymer coming from renewable organic resources (corn starch or sugarcane). PLA Filament is