4.9 (123) · € 26.00 · En Stock
I built a heater box and ventilation system for a custom car from scratch. The heater and ventilation is controlled by 8 servos. I originally controlled it using an Arduino. As time passed I switched over to a microprocessor. I originally controlled the servos using a Scott Edwards controller but I did not have the ability to turn off the servos. With the Pololu Micro SSC I can shut the servo’s off after they are moved. The servos need to turn off when done. Not only do they not need t
DIY smart dew heaters controller - DIY Astronomer - Stargazers Lounge
Heater project Chevy Bolt EV Forum
Pololu - Posts tagged “community projects” (Page 8)
Pololu Blog (Page 3)
M2 HEATED ENCLOSURE CONCEPT - ideas and constructive criticisms requested
Pololu - Posts tagged “community projects” (Page 27)
Pololu Blog (Page 18)
DIY Sous Vide Heating Immersion Circulator for About $75 - Seattle Food Geek
Arduino Controller for Automatic gates - Surf Devices - Wake Garage
Make a custom heater for your vehicle