RTS-500 Cutter Adapter for Festool Domino DF 700 – Seneca Woodworking
5 (518) · € 38.50 · En Stock
The RTS-500 Cutter Adapter is a precision-machined, hardened steel component that allows mounting any of the Festool Domino DF 500 cutters to the Festool Domino XL DF 700. This enables the DF 700 to cut smaller mortises that previously could only be done with the DF 500. Any of the standard Domino Cutter bits (4mm/5mm/6mm/8mm/10mm) will work with this adapter. The RTS-500 Cutter Adapter is sized so that when attached to a DF 500 cutter, the overall length is the same as a DF 700 cutter. This ensures mortises cut with DF 500 cutters on the DF 700 are the same width as they would be if cut with the DF 500. This also maintains the accuracy of the plunge depth gauge on the DF 700 and simplifies setting mortise depth. Because of the lower fence travel limit of the Domino XL, the RTS-500
Seneca woodworking, Cutter adapter, Festool Domino
Add more versatility to your Domino Joiner - Woodcraft Blog – Seneca Woodworking
1/2 Domi-Shim for Festool Domino XL DF 700 – Seneca Woodworking
The Seneca Woodworking Domiplate XL is our best selling fence solution designed for the Festool Domino XL DF 700 mortising tool. With a fixed offset built into each side, it eliminates the possibility of error due to 'fence drift' and greatly speeds the setup of the Domino for mortising, saving you time and money from misaligned mortises. This version of the Domiplate XL is setup for 1/2 ply on one side, and has a 0 offset on the other side.
0 Offset Domiplate XL (Zero Offset Domiplate XL)
The RTS-500 Cutter Adapter is a precision machined, hardened steel component that allows mounting any of the Festool Domino DF 500 cutters to the
RTS-500 Cutter Adapter for Festool Domino DF 700
Domiplate™ XL for 12mm and 18mm ply – Seneca Woodworking
Seneca Woodworking – Stockroom Supply Tools
The RTS-500 Cutter Adapter is a precision machined, hardened steel component that allows mounting any of the Festool Domino DF 500 cutters to the Festool Domino XL DF 700. This enables the DF 700 to cut smaller mortises that previously could only be done with the DF 500. Any of the standard Domino Cutter bits (4mm/5mm/6mm/8mm/10mm) will work with this adapter. The RTS-500 Cutter Adapter is sized so that when attached to a DF 500 cutter, the overall length is the same as a DF 700 cutter.
Seneca Woodworking RTS-500 Cutter Adapter for Festool DF700
The RTS-500 Cutter Adapter is a precision machined, hardened steel component that allows mounting any of the Festool Domino DF 500 cutters to the Festool Domino XL DF 700. This enables the DF 700 to cut smaller mortises that previously could only be done with the DF 500. Any of the standard Domino Cutter bits (4mm/5mm/6mm/8mm/10mm) will work with this adapter. The RTS-500 Cutter Adapter is sized so that when attached to a DF 500 cutter, the overall length is the same as a DF 700 cutter.
Seneca Woodworking RTS-500 Cutter Adapter for Festool DF700
Seneca Woodworking SWMK01 Small Mortise Kit for Festool Domino XL DF700
The Domiplate XL is for the Domino XL DF700. For the DF500 version, click HERE., The Seneca Woodworking Domiplate XL™ is a fixed fence solution
Domiplate™ XL for 1/2 and 3/4 Ply
