ABS (Acrylonitrile-Butadiene-Styrene) Filament ABS (Acrylonitrile butadiene styrene) is one of the most used materials in the plastics industry and gained a lot of popularity within the 3D printing sector due to the ease of processability and great mechanical properties. This ABS filament is a strong material with a high toughness, high impact resistance and is also light and durable. After the print is done you can easily post-process the object by sanding it or with a acetone vapor installation to get rid of the visible layers and get a injection molded surface quality. Measurements & Tolerance Size Diameter tolerance Roundness 1,75 mm Filament +/- 0,05mm 95% 2,85 mm Filament +/- 0,10mm 95% Material properties Description Value Test method Density 1,05 g/cm3 ISO 1183/B Melt Mass-Flow Rate (MFR) (220ᵒC/10KG) 15 g/10 min SO 1133 Tensile Stress 45 Mpa ISO 527-2/50 Flexural Modulus 2300
ABS (Acrylonitrile-Butadiene-Styrene) Filament
ABS (Acrylonitrile butadiene styrene) is one of the most used materials in the plastics industry and gained a lot of popularity within the 3D printing sector due to the ease of processability and great mechanical properties. This ABS filament is a strong material with a high toughness, high impact resistance and is also light and durable. After the print is done you can easily post-process the object by sanding it or with a acetone vapor installation to get rid of the visible layers and get a injection molded surface quality.
Measurements & Tolerance
Size
Diameter tolerance
Roundness
1,75 mm Filament
+/- 0,05mm
95%
2,85 mm Filament
+/- 0,10mm
95%
Material properties
Description
Value
Test method
Density
1,05 g/cm3
ISO 1183/B
Melt Mass-Flow Rate (MFR) (220ᵒC/10KG)
15 g/10 min
SO 1133
Tensile Stress
45 Mpa
ISO 527-2/50
Flexural Modulus
2300 Mpa
ISO 178
Impact strength Notched Izod
19 Kj/m²
ISO 180/A
Tensile Strain
2,50%
ISO 178
Printer settings
Description
Value
Printer nozzle temperature
240 - 280°C
Heated bed temperature
90 - 110°C
Bed Adhesion
Magigoo Original on glass or a PEI Sheet
Additional info
To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. Keep the 3D printer out of the sun.
When the 3D printer is not being used it is important to keep the 3D4MAKERS ABS Filament in a bag and stored in a cool (15-25˚C) and dry room away from UV light until it is used again.
*Our ABS Filament is also available in ABS ESD filament and in ABS Kevlar filament.
3D4Makers ABS Multicolor 2,85mm, 750 gram (several colors)
Perstorp AB creates 3D printer materials venture with 3D4Makers - 3D Printing Industry
3D4Makers ABS - 3DPrintaj 3d4makers abs filament 3d printer
Jón Schone on X: Just slapped on a new @3d4makers ABS 5kg spool to print a new rim halve. Wish me luck! / X
The Unusual Properties of PCL 3D Printer Filament « Fabbaloo
3D4Makers ABS 2,85mm, 750 gram (several colours)
3D FilaPrint Black Premium ABS 1.75mm 4.5Kg 3D Printer Filament - 3D FilaPrint
3D4Makers Natural PPSU Filament 2.85 mm - 3D Compare Materials
All Filaments by Properties
3D Printing ABS Filament - Gizmo Dorks
3D4Makers.com
3D4Makers Natural PLLA Filament 1.75 mm - 3D Compare Materials
Material ABS - rigid and tough material