M5-0.8 Short Brass Threaded Inserts – Initeq

4.7 (607) · € 40.50 · En Stock

These create much more convenient and professional parts than using "captive nuts" (where you have to design a slot for a nut, and then place the nut in the slot and hold it there while affixing a screw). They also can be used in some situations where captive nuts just don't work.These are inserted into a hole in the p
These create much more convenient and professional parts than using captive nuts (where you have to design a slot for a nut, and then place the nut in the slot and hold it there while affixing a screw). They also can be used in some situations where captive nuts just don't work.

These are inserted into a hole in the print that is slightly smaller than the insert, and set in place using a soldering iron to melt the plastic around the insert. The inserts have a slight taper and small fins that the plastic flows around, resulting in an extremely strong bond.

Rather than adjust designs around the limitations of 3D printing (supports, print bed size, etc), divide your parts into separate components that fasten using these inserts and machine screws. Not only does this give you greater flexibility when designing a part, but also allows you to re-print only failed components rather than full assemblies - saving time and money.

These are threaded M5-0.8 with an overall length (OAL) .265
Recommended hole size is .315 (top) and .303 (bottom)
These create much more convenient and professional parts than using captive nuts (where you have to design a slot for a nut, and then place the nut in the slot and hold it there while affixing a screw). They also can be used in some situations where captive nuts just don't work.These are inserted into a hole in the print that is slightly smaller than the insert, and set in place using a soldering iron to melt the plastic around the insert. The inserts have a slight taper and small fins that the plastic flows around, resulting in an extremely strong bond.Rather than adjust designs around the limitations of 3D printing (supports, print bed size, etc), divide your parts into separate components that fasten using these inserts and machine screws. Not only does this give you greater flexibility when designing a part, but also allows you to re-print only failed components rather than full assemblies - saving time and money.These are threaded M5-0.8 with an overall length (OAL) .265Recommended hole size is .315 (top) and .303 (bottom)

Round M5 Brass Insert, For Hardware Fitting, Size: 0.4 Inch (height) at Rs 600/kg in Jamnagar

20 X #4 4-40 long laiton métal filé inserts thermiques pour impression 3D plastique EUR 6,24 - PicClick FR

initeq] Brass Threaded Inserts for Plastics Assortment A - Import It All

These create much more convenient and professional parts than using captive nuts (where you have to design a slot for a nut, and then place the nut

M5-0.8 Short Brass Threaded Inserts

International Online Shopping Store from US to Trinidad & Tobago

E-Z Press™ Threaded Insert - Flanged - Brass - M5-0.8

[initeq] M3-0.5 Threaded Heat Set Inserts for 3D Printing (50, Long) : : Industrial & Scientific

10Pcs Thread Reducing Nut Repairing Insert Kit Pipe Fitting Reducer Adapter Stainless Steel Fastener Accessory, Female M5 x 0.8mm, Male M8 x 1.25mm 12MM

M3-0.5 Short Brass Threaded Inserts – Initeq

10Pcs Thread Reducing Nut Repairing Insert Kit Pipe Fitting Reducer Adapter Stainless Steel Fastener Accessory, Female M5 x 0.8mm, Male M8 x 1.25mm 12MM