4.7 (149) · € 6.50 · En Stock
The main difference is the lack of a DC Barrel Jack and the substitution of the square Type-b USB connector for a Mini-B USB connector. Arduino Uno R3. The pin headers are not soldered to the module.
1pcs Nano 3.0 Mini USB Driver ATmega328 5V 16M Micro Controller
Mini USB CH340 Nano 3.0 ATmega328P Controller Board Compatible For
*The Nano is using the chips ATmega328P and CH340, Replace FT232RL. *It is a smallest, complete, and breadboard friendly board. It has everything that
AITRIP 3pcs for Arduino Mini Nano V3.0 ATmega328P 5V 16M Micro Controller Board Module with 3pcs USB Cable Compatible with Arduino IDE
Mini USB With Bootloader Nano 3.0 Controller Compatible for
Arduino Nano Micro-Controller with ATmega328P 16MHz 5.0V CH340G
OSOYOO Nano board is tiny and breadboard friendly microcontrollers based on the CH340/ATmega328. It works the same as original Nano and is very
OSOYOO 3pcs Nano Atmega328P Module CH340 5V/16M USB-C Micro-Controller Board for Arduino Nano V3.0
Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power. it can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source. It is a smallest, complete and breadboard friendly board. It has with more analog input pins and on board +5V AREF jumper, compatible with Windows, Mac and Linux operating system.
DWEII 2pcs for Nano V3.0 ATmega328P Module CH340C Chip 5V 16MHz Mini USB Micro-Controller Board with 2pcs Mini USB Cable Compatible with Arduino
Nano Mini USB With Bootloader Compatible Nano 3.0 Controller Board
Welded Nano 3.0 Ch340g Atmega328 Mini Ch340c Controller Board
Arduino Nano Micro-Controller with ATmega328P 16MHz 5.0V CH340G
Arduino Nano V3.0 With Mini USB / Micro USB Cable
OSOYOO Nano Board ATMEGA328P Module CH340G Mini Microcontroller
Mini USB Nano V3.0 ATmega328 Micro-controller 16M 5V CH340G board
Addicore Nano 3.0 - ATmega328P
Attention:before running the procedure, pls install the corresponding computer system driver. Drivers: directly from the chip manufacturer: WCH 340
2 Pcs Mini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable for Arduino