Capricorn 1 Meter XS Low Friction 1.75mm Bowden Tubing –
4.6 (332) · € 6.00 · En Stock
NOTE: Price is per Meter. Lengths up to 10m will be one consistent piece unless otherwise requested. One Meter of Capricorn's flagship PTFE Tubing, enhanced with a proprietary blend of high performance additives. 1.9mm inner, 4mm outer diameter for 1.75mm filaments. This is, hands down, the single best PTFE Bowden tub
NOTE: Price is per Meter. Lengths up to 10m will be one consistent piece unless otherwise requested.
One Meter of Capricorn's flagship PTFE Tubing, enhanced with a proprietary blend of high performance additives. 1.9mm inner, 4mm outer diameter for 1.75mm filaments.
This is, hands down, the single best PTFE Bowden tubing you can buy for your home 3D printer.
Guaranteed to always be the right diameter, and perfectly round. Print flexible filaments without the binding up that happens with over-diameter tubes.
Each meter of tubing comes with one Capricorn sticker to decorate your printer.
Data Sheet
Premium XS Series Dark Blue Tubing
Additives
Blue Color and Secret High Lubricity Additive Mixture
Best For Chunky Filaments
YES
Best For Flexible Filaments
YES
Can See Through
NO
Pulling Friction♠
0.8
Color
Dark Blue
Density (kg/m3)
2300 +/-100
Hardness
60-65
Inner Diameter (mm)
1.90 +/- 0.05
Linear Thermal Expansion at 250 °C
2.2-3.3%
Material
Highest Quality Pure Virgin PTFE
Melting Point (°C)♥
up to 340
Outer Diameter
3.95 +/- 0.05
Roundness (ϵ)
< 0.1
Stiffness§
Medium High
Thermal Conductivity (W/m-k)
0.25
Wear Rate (gm/s)
0.01
Young's Modulus (GPa)¥
0.53
♠Pulling Friction is calculated as the average force required to pull 1.2 meters of 1.75mm PLA filament through 1 meter of tubing at a constant speed, relative to 1 meter of cheap white reference tubing. Note that although we observed the friction of the TL series to be about the same or even slightly lower than our XS series, it also has a larger internal diameter.
§Other Bowden tubes may vary significantly in stiffness, depending on the material from which they're made. Our tubing generally tends to be more flexible than most, with the TL being more flexible than XS.
¥Young's Modulus (YM) is the measure of elasticity of the material. Our XS Series additives give the PTFE a slightly greater YM than the TL Series.
♥Temperatures were approximated by heating samples of all tubing simultaneously, observing how quickly each one began to deform. Printer failures may happen at significantly lower temperatures.
Printing high temperature materials may create dangerous off-gassing. Please refer to the Safety Page.
Capricorn XS Series PTFE Bowden Tubing for 1.75mm Filament 01900213.4 - 3DWare Shop Schweiz
Capricorn XS - High Performance PTFE Tube
Capricorn PTFE Tube XS Series(1 Meter)
Capricorn XS Series PTFE Bowden Tubing Cut to Length - 1.75mm (1m)
Capricorn 1 Meter XS Low Friction 1.75mm Bowden Tubing –
Creality Capricorn Bowden Tubing 1M, Bowden PTFE Tube for 1.75mm Filament with Teflon Tube Cutter, 2X PC4-M6 Extruder Fitting & 2X PC4-M10 Hotend Fitting for Ender 3 V2/3/3 Pro/5/CR-10/10S 3D Printer
Capricorn PTFE Tube XS Series(1 Meter)
